Step-by-step demonstration of the Radio Frequency (RF) attachment function on a hydra dermabrasion machine. You’ll observe the precise techniques for preparing the skin, accurately applying the appropriate conductive medium, and executing the correct application method of the RF handpiece.
This visual guide is designed to equip you with the practical skills needed to effectively utilize the RF attachment for enhanced collagen stimulation, skin tightening, and contouring in your hydra dermabrasion treatments. Following this demonstration, you will be required to submit a video assessment of yourself performing this technique to confirm your proficiency.
For optimal viewing and to ensure you capture every detail, please set your video quality to High Definition (HD).
Click here for RF Handpiece Troubleshooting
- Check Power Connection: Ensure the RF handpiece is securely plugged into the machine’s designated port.
- Intensity Setting: Verify the intensity setting on the main unit; start at a low setting and gradually increase.
- Conductive Medium: Ensure you’re using enough conductive gel or cream. RF energy needs a medium to penetrate the skin effectively.
- Handpiece Contact: Make sure the RF electrodes are in full, even contact with the skin.
Intermittent Heat?
- Consistent Gel: Ensure a consistent, ample layer of conductive gel.
- Loose Connections: Check for any loose connections at the handpiece or the machine’s port.
- Consistent Pressure: Maintain consistent, even pressure on the skin during treatment.
Handpiece Not Turning On/No Lights?
- Machine Power: Confirm the main machine is powered on and the RF function is activated.
- Handpiece Connection: Check the handpiece connection to the machine.
Device Feels Too Hot (Handpiece or Machine)?
- Allow Cooling: Allow the device to cool down. Some RF devices have an overheating protection system that may temporarily shut off.
- Clear Vents: Ensure any vents on the main unit or handpiece are not obstructed.
Instructions for the Practical Assessment Submission:
Assessment Goal: To demonstrate your practical competency in setting up and correctly utilizing the Radio Frequency (RF) attachment function of a hydra dermabrasion machine.
What to Submit: A short video (approximately 1-3 minutes) of yourself demonstrating the RF attachment technique.
Video Submission Requirements:
- Client Comfort (Optional but Recommended): Briefly mention or simulate how you would ensure client comfort during this step, including checking for appropriate heat sensation.
- Verbal Explanation (Recommended): As you perform the steps, it’s highly recommended to verbally explain what you’re doing and why. For example, “I’m applying a thin layer of conductive gel,” or “I’m using continuous, circular motions to ensure even heat distribution.”
- Video Clarity: Please ensure your video submission is filmed in High Definition (HD) and is well-lit so all actions are clearly visible.