This focused training video provides a crystal-clear, step-by-step demonstration of the oxygen spray function on a hydra dermabrasion machine. You’ll observe the precise techniques for preparing the spray gun, accurately filling it with the appropriate solution, and executing the correct application method on the skin. This visual guide is designed to equip you with the practical skills needed to effectively utilize the oxygen spray for enhanced hydration, soothing, and serum delivery in your hydra dermabrasion treatments. Following this demonstration, you will be required to submit a video assessment of yourself performing this technique to confirm your proficiency.
For optimal viewing and to ensure you capture every detail, please set your video quality to High Definition (HD)
Click here for Spray Handpiece Troubleshooting
- Liquid in Bottle: Ensure there is enough liquid in the spray bottle.
- Bottle/Hose Connection: Confirm the spray bottle is securely attached and any connecting hoses are firmly in place.
- Clear Nozzle: This is the most common issue. The fine nozzle can get clogged with dried solution. If detachable, soak it in warm water or a suitable cleaning solution and use a fine needle or brush to clear the opening.
- Air Pressure: If your unit uses air pressure, ensure the air compressor function on the main unit is active and set correctly.
- Hose Kinks: Check the flexible hose for any kinks or blockages.
Uneven Spray Pattern?
- Partially Clogged Nozzle: The nozzle is likely partially clogged. Clean it thoroughly as described above.
Solution Leaking?
- Tight Connections: Check all connections for tightness.
- Secure Nozzle: Ensure the bottle lid is secure and the nozzle is properly seated.
- Replace Seals: Replace any worn seals or O-rings if visible.
Instructions for the Practical Assessment Submission:
Assessment Goal: To demonstrate your practical competency in setting up and correctly utilizing the oxygen spray function of a hydra dermabrasion machine.
What to Submit: A short video (approximately 1-3 minutes) of yourself demonstrating the oxygen spray technique.
Video Submission Requirements:
Client Comfort (Optional but Recommended): Briefly mention or simulate how you would ensure client comfort during this step.
Verbal Explanation (Recommended): As you perform the steps, it is highly recommended to verbally explain what you are doing and why. For example, “I’m holding the spray gun approximately 6-8 inches from the skin,” or “This motion ensures even coverage.”
Video Clarity: Please ensure your video submission is filmed in High Definition (HD) and is well-lit so all actions are clearly visible.